- This topic has 7 replies, 5 voices, and was last updated 10 years, 7 months ago by
.
-
Posts
-
Can anyone advise me on the maximum tire size I can run on an E-46 330xi on an 18 x 8.5 wheel (not staggered)? I know I can go to at least a 235/40 R18, but am wondering about a 245/40 or even a 255/35.
Brock –
Mostly depends on the offset of your wheels, do you know it? I know my car is not an XI, but on my coupe I run 18×8.5 +42mm offset and I can fit 255/35/18 tires with my super low suspension.Check out the tire/wheel/suspension database at Bimmerfest, see what other Xi owners are running.
http://www.bimmerfest.com/wiki/index.php/BMW_E46#Wheel.2Ftire_fitments
Tire Rack and other retailers will sell short the possibilities. Every time I order 245/40/17 tires for my K1’s they call me to tell me they won’t fit.
I am running 255/40R17 and 255/35R18 tires on 8.5″ wheels, each with a 40 offset. My car is lowered 0.25″ in front and 0.5″ in the rear compared to stock. My coupe could take a smaller offset (32-35) or wider wheel in the rear without rubbing, but I don’t think sedans are quite as roomy.
FWIW Kris Linquist (krisl) had a post stickied on bimmerfest for a while which had a link to a much larger database than what is preserved in the bfest wiki. If you search for it you could probably turn it up. I don’t know if the database is still around.
Thanks to both of you for your feedback.
The wheels in question are VMR V703s with what appears to be a 40 mm offset (based on my measurement at ~41 mm and the VMR standard offerings for that wheel). From the Bimmerfest database it looks like 255/35R18s can be run on an E-46, although I don’t know if the xi has any significant differences in geometry than might cause a problem.
My inclination is to go with the 245/40R18s, which would seem to give me a little margin (and are currently running $43 less per tire at Tire Rack).
Cliff, As you suggest, I am more concerned about width. I’m not so worried about diameter – the xi rides higher than the other E-46s, and 245/35R18 is not an available size in the Direzza ZII.
255/35/18 on an 18×8.5″ (ET50) rim is the stock rear size on my E46, though probably not on any E46 xi models. The stock front is 18×8″ ET47.
I have run both 255/35/18 (17×8.5 ET50) and 245/40/17 (17×8.5″ ET40 rim) tires on the front and back of my E46. Sometimes in front it rubs the inner fender (towards engine bay) at full steering lock so I put in a 5mm spacer and have been waiting for some 12mm spacers. On the backs if you use ET40 that’s sitting 10mm farther outward than stock (ET50) so on a lowered car it can run the fender liner or fender lip. With a non-lowered xi, I doubt that would ever be an issue.
- You must be logged in to reply to this topic.